# Installation - PRS-M3DT With Version 2.0 Strap

{% hint style="danger" %}
ENSURE THAT THE PRS-M3DT IS OFF BEFORE ATTACHING AND/OR DISCONNECTING THE PRS-M3DT FROM THE DJI M3D/T.
{% endhint %}

{% hint style="info" %}
Note that these installation instructions are only relevant for those PRS-M3DT units containing Version 2.0 of the PRS-M3DT mounting strap. The installation instructions for Version 1.0 can be found in [Appendix B](appendix-b-installation-prs-m3dt-with-version-1.0-strap).
{% endhint %}

## Attaching the PRS-M3DT to the DJI M3D/T Drone

<table data-header-hidden data-full-width="false"><thead><tr><th width="103"></th><th width="122"></th><th width="230"></th><th></th></tr></thead><tbody><tr><td>Step 1</td><td>Locate the Forward Gasket Door on the Drone</td><td>In order for the PRS-M3DT to be properly installed on the DJI M3D/T the forward gasket door needs to be opened and properly positioned.</td><td><img src="https://4080778291-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxDrKOPTu0Xxe4OjJPyDV%2Fuploads%2FqZlNAxZ3gInX4Z6Tt5E3%2Fimage.png?alt=media&#x26;token=a47bd8cb-f399-428d-ba6c-15c38b9b3e89" alt="" data-size="original"></td></tr><tr><td>Step 2</td><td>Open the Forward Gasket Door</td><td>Open the forward gasket door, and align the stem of the door with the notch in the base of the PRS-M3D as shown.</td><td><img src="https://4080778291-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxDrKOPTu0Xxe4OjJPyDV%2Fuploads%2Fwl0ythK1Ys9sr79Ljwyh%2Fimage.png?alt=media&#x26;token=d17f5976-7518-4f7c-bfbe-261ceac0b96e" alt="" data-size="original"></td></tr><tr><td>Step 3</td><td>Insert PRS Into PSDK Port</td><td><p>Install the PRS-M3DT onto the DJI M3D/T. Ensure the orientation is correct, and that the PSDK USB-C connector is lined up.</p><p>*The arrow at right indicates the front of the drone.<br>**<strong>The gasket on the PSDK connection will not allow the PRS-M3DT to be properly seated until the mounting screws, which hold the unit down, are installed in Step 8.</strong></p></td><td><img src="https://4080778291-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxDrKOPTu0Xxe4OjJPyDV%2Fuploads%2FfXNX6u9TXSsoAPqERAR3%2Fimage.png?alt=media&#x26;token=36e4c549-f2ec-4567-a19a-e1f16c1ebf34" alt="" data-size="original"></td></tr><tr><td>Step 4</td><td>Hardware Check</td><td>Verify that all of the included hardware is present. This includes two shorter M3x8mm (QTY2) screws for the back of the PRS-M3DT and an additional strap for securing the front of the PRS-M3DT. The strap contains pre-installed inserts (QTY 2) and pre-installed M3x16mm (QTY 2) screws (shown at right). </td><td><img src="https://4080778291-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxDrKOPTu0Xxe4OjJPyDV%2Fuploads%2FBi83wVpTh8U8dqN5HSgl%2Fimage.png?alt=media&#x26;token=1240c10e-0a26-4031-bc6f-e4e0323d0392" alt="" data-size="original"></td></tr><tr><td>Step 5</td><td>Install Rear Screws Into PRS</td><td>Install the M3 x 8 mm screws (QTY 2) through the back holes of the PRS-M3DT into the drone as illustrated to secure the back of the PRS-M3DT to the top of the drone. Ensure the screws are tightly secured.</td><td><img src="https://4080778291-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxDrKOPTu0Xxe4OjJPyDV%2Fuploads%2FqD4hP1TafjqcWAZGdlZc%2Fimage.png?alt=media&#x26;token=70565f1e-719b-4aa4-bd11-9b7913f7a60a" alt="" data-size="original"></td></tr><tr><td>Step 6</td><td>Double Check That Mounting Insert Is Pre-Installed Into Strap</td><td>Double-check that both the included inserts (QTY 2) and longer M3x16 screws (QTY 2) are pre-installed into the ends of the PRS-M3DT straps as illustrated.</td><td><img src="https://4080778291-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxDrKOPTu0Xxe4OjJPyDV%2Fuploads%2FrlBwK4EsQCdVfrAXbQDn%2FIMG_0845.jpg?alt=media&#x26;token=cc3e4223-1f2c-4590-b826-77f775395bdb" alt="" data-size="original"></td></tr><tr><td>Step 8</td><td>Position Straps Around Forward Arms</td><td>Loop the PRS-M3DT straps underneath the forward arms of the DJI M3D/T and insert the ends of the straps into the mounting holes as shown at right.</td><td><img src="https://4080778291-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxDrKOPTu0Xxe4OjJPyDV%2Fuploads%2Fb8207PCv56mH4C1T35Gi%2Fimage.png?alt=media&#x26;token=3c4039ed-463f-4f08-840a-8240b5d145e8" alt="" data-size="original"></td></tr><tr><td>Step 9</td><td>Install Mounting Screws</td><td>Finish installing the PRS-M3DT using the M3x16mm (QTY2) screws to secure the front of the PRS-M3DT to the top of the drone. The installation holes used are located at the front/closest to the drone's camera, as shown at right. Ensure the screws are tightly secured.</td><td><img src="https://4080778291-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxDrKOPTu0Xxe4OjJPyDV%2Fuploads%2FjYg4WCoSPoSdxP45NNAz%2Fimage.png?alt=media&#x26;token=72fd6504-7453-4233-9f8f-795c04efc011" alt="">      </td></tr><tr><td>Step 10</td><td>Power On Drone/PRS</td><td>To turn on the PRS-M3DT, you will need to turn on the DJI M3D/T drone. </td><td><img src="https://4080778291-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxDrKOPTu0Xxe4OjJPyDV%2Fuploads%2Fl16DJw3j8M1rDI0Hn4cg%2Fimage.png?alt=media&#x26;token=003cb735-4d67-46d1-95e4-ad3d55733b09" alt="" data-size="original"></td></tr><tr><td>Step 11</td><td>Check PSDK Connection</td><td>Check for the PSDK connection on the Drone Transmitter. This will be indicated by the PSDK symbol on the right-hand side of the transmitter's screen when in the camera view.</td><td>          <img src="https://4080778291-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxDrKOPTu0Xxe4OjJPyDV%2Fuploads%2FGD5QgFh1HxdMDM7SybWh%2Fimage.png?alt=media&#x26;token=84e9935c-9e05-4eff-b1f4-bdae901401dd" alt="">  </td></tr><tr><td>Step 12</td><td>Power Off Drone/PRS</td><td>Power off the DJI M3D/T. The PRS-M3DT will take up to three (3) seconds for the LED to turn off. Once the LED is off the PRS is safe to approach. Do not unplug or move the DJI M3D/T or PRS-M3DT until the PRS-M3DT is turned off.</td><td><img src="https://4080778291-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxDrKOPTu0Xxe4OjJPyDV%2Fuploads%2F4A2ZWgYEwxexjnjSmOSl%2Fimage.png?alt=media&#x26;token=115e42a9-fcd7-4e1e-8d0b-79289853ad98" alt="" data-size="original"></td></tr></tbody></table>

{% hint style="info" %}
If removing the PRS-M3DT from the DJI M3D/T, it is possible that the strap and associated hardware (QTY 2 pre-installed inserts and QTY 2 pre-installed M3x16mm screws) will become stuck in the mounting holes. If this occurs, either gently loosen the screws further or gently move the strap from side to side to relieve pressure on the ends. Do not pull excessively on the strap to try and force it out.
{% endhint %}
