Revision Notes

Revision #	Date	Revision Description
1.0	May 10th, 2024	First External Release
1.1	June 10th, 2024	Updated Specifications From ASTM F3322-22
1.2	June 11th, 2024	Added Deployment Button Mapping Section For Immediate PRS Trigger From Custom Button
1.3	July 10th, 2024	Added Operating Limitations Based On ASTM F3389 Method D Testing
1.4	July 25th, 2024	Added Additional Language Regarding MDA And Maintaining Altitude At Or Above MDA For Operations Over People
1.5	July 30th, 2024	Updated EASA MOC2512 Wind Limit
1.6	October 4th, 2024	Added PRS-M3DTEX MOC2511 FTS Overview
1.7	November 1st, 2024	Updated Installation Instructions
1.8	November 15th, 2024	Added Flight Hub 2 Interface Description.
1.9	November 21st, 2024	Added Calibration Description and Updated FAQs To Remove Outdated Questions
2.0	December 13th, 2024	Updated Warranty For Number Of Deployments
2.1	January 16th, 2025	Clarified That DJI M3D/T Can Be Moved During a Calibration If Safe Practices Are Observed.
2.2	January 28th, 2025	Added Instructions On How To Use AVSS Assistant For Firmware Updates And Other General Tasks Provided Guide On How To Create Geofences For Flight Operations Removed Emergency Trigger Button From The Config page Removed All PRS-M3DTEX Content Into Separate Manual
2.3	January 31st, 2025	Added Distinct System Diagrams and Installation Instructions For Both Permanent And Non-Permanent Mounting Straps.
2.4	February 10th, 2025	Further Clarified Manual Trigger Device (MTD) Arming Height