Features & Specifications

The PRS-M3DT has been designed to easily integrate with the DJI M3D/T. The PRS mounting holes and screws secure the PRS-M3DT without interfering with onboard sensors or DJI Dock 2 usage. The system includes an integrated EM to power the PRS and FTS. The FTS is initiated when either the pilot instigates a deployment through the MTD or when the ATS, using the onboard sensors located in the EM, determines that the DJI M3D/T has breached the safe flying parameters. Once the FTS is initiated and stops the motors from spinning, the Parachute Pod™ is deployed and will result in the DJI M3D/T descending under an inflated parachute.

Features

Mounting Bracket	The custom base of the PRS-M3DT has an integrated mounting bracket that allows the PRS to be easily installed with minimal effort.
Mounting Straps	The mounting straps are secured to the PRS-M3DT and loop around the forward arms of the DJI M3D/T to provide an additional attachment method.
Independent Power Source	The PRS-M3DT is equipped with an independent power source that allows the system to deploy if the DJI M3D/T loses power.
ATS	The ATS automatically detects failures and triggers the parachute release.
MTD	The MTD can initiate deployment of the parachute recovery system at the discretion of the remote pilot in command.
FTS	The plug-and-play FTS stops power to the motors in the event of a failure and reduces the likelihood of entanglement in the DJI M3D/T’s propellers.
Flight Data Logging	Flight data logging to a dedicated internal storage device that is integrated in the PRS-M3DT.

Specifications

Total Weight	1.57 kg (3.46 lb)
Average Descent Rate (1.57 kg)	4.34 m/s (14.24 ft/s)
Minimum Deployable Altitude Rating (1.57 kg)	34.8 m (114.17 ft)
Deployment Technology	Energetic Charge
Deployment Trigger	Manual and/or Autonomous
Average Kinetic Energy (1.57 kg)	14.8 J (10.9 ft-lbs)
CAT 2 Wind Limit (FAA)	10 mph (8.69 kts)
CAT 3 Wind Limit (FAA)	13 mph (11.30 kts)

Parachute Recovery System

Main System Weight	145.0 g (5.11 oz)
Deployment Release Time	<100ms
Operating Temperature	-20˚C to +45˚C (-4°F to 113°F)*

Parachute Pod™

Parachute Size	1.1m² (11.8 ft²)
Risers/Attachment Location	Internal

Flight Termination System (FTS)

FTS Method	PSDK Power Cut (For EX Version Only)
Integration Process	PSDK Port Slide Over Battery (For EX Version Only)

Manual Triggering Device (MTD)

Range	< 8 km (<4.97 mi)
Type	DJI M3D/T Transmitter PSDK Interface