Maintenance & Care
Maintenance and inspection intervals of the AVSS PRS-M3DT are required to maximize the safety of each flight and ensure proper functionality for parachute deployment whenever it may be required. The PRS-M3DT’s Parachute Pod™ is intended as a single-use item that must be repacked in twelve (12) month intervals.
Post-Flight (Monthly)
Visually inspect the PRS-M3DT to ensure there is no damage.
Storage
Always ensure the power is off.
Make sure the unit is clean and dry before putting in the case.
Extended Storage Considerations
Store in a dry room that is at room temperature.
Uninstall the AVSS PRS-M3DT assembly from the DJI M3D/T drone.
Visually inspect the USB-C located on the underside of the PRS-M3DT. Check against signs of corrosion, dust/dirt buildup, wear, or any other types of abnormalities.
Inspect the strap attachment and verify the mounting screw remains secured, and that the strap is free of damage.
If any of the above defects are present during the 18 month inspection period, contact AVSS for further information.
Last updated
