AVSS Assistant - Additional Functions
Last updated
Last updated
The AVSS Assistant also contains a function to download flight logs to a local computer. To initiate this process, click on the “Download Log” button. A new box “Download Log” will appear. In the “Number of Logs” box type the number of the most recent logs that are to be downloaded and click on the “DOWNLOAD” button. The download will always start from the most recent log and work backward.
At this time, the PRS-M3DTEX will disconnect from the AVSS Assistant application and initiate the log recovery and transfer indicated by the blinking blue colour of the PRS LED. This process might take several minutes.
When the logs have been downloaded, the PRS-M3DTEX will enter "SD mode" as indicated by a solid blue LED color. As outlined previously in the Firmware Updates section, once placed in "SD mode", the contents of the PRS-M3DTEX's SD card will be accessible as a USB drive on your local computer. This drive contains the flight logs in the “event_log” and “onboard_flash” folders.
Error codes will appear on the PRS-M3DTEX whenever a critical error occurs in flight. These error codes will appear in the PSDK display window until they have been cleared. When a critical error shows up, contact AVSS first. After AVSS analyzes the error, if it is safe to do so, you will be advised to manually clear the error.
To clear the error, click on the “Clean Error Code” and click on the “Clean” button.
